ART 335 Midterm Grading

Goal

The goal of midterm grad­ing is to pro­vide an assess­ment of stu­dent work com­pleted at the end of the semes­ter. Grad­ing assigns final course grade.

Objective

Stu­dents will turn in all work for review, and grades will then be assigned.

Assignment

Based on the stan­dards out­lined in the course syl­labus, all work assigned to this point in the semes­ter will be pre­sented and graded dur­ing the sched­uled grad­ing period.

Work to be Graded

Please turn in all work assigned to this point in the semes­ter. This includes all assign­ments, exer­cises and sketches. If work has been revised at any time, then please turn in both old and new ver­sions, each clearly marked. Fail­ure to do so may cause an unsat­is­fac­tory grade being recorded. Work should be well orga­nized and pro­fes­sion­ally pre­sented. Please bind or orga­nize all process work into an easy to use for­mat. Please fol­low the orig­i­nal assign­ment instruc­tions as to par­tic­u­lar project spec­i­fi­ca­tions. Scan or pho­to­graph any por­tions as necessary.

Please sub­mit the fol­low­ing projects:

Assignments

  1. Assign­ment 01.02: Vir­tual 3D Pack­ag­ing Part One
  2. Assign­ment 01.02: Vir­tual 3D Pack­ag­ing Part Two
  3. Assign­ment 01.02: Vir­tual 3D Pack­ag­ing Part Three
  4. Assign­ment 01.02: Vir­tual 3D Pack­ag­ing Part Four
  5. Assign­ment 02.04: Phys­i­cal 3D Packaging

Exercises

  1. Exer­cise 01.01: Con­tour Cut­ting and Die Lines
  2. Exer­cise 02.01: Tulsa County Library Access
  3. Exer­cise 03.01: Adobe Dimension
  4. Exer­cise 04.04: Laser Cut­ter Introduction
  5. Exer­cise 16.11: Vir­tual Instruction

Sketches and source material

Deadlines

Tues­day, Sep­tem­ber 8, 2020. Assign­ment given.

Thurs­day, Sep­tem­ber 24, 2020. Assign­ment Due. Drop off work in D2l Dropbox.